Tantalum Pin

D 1.00 mm  L 1.80 mm (D 0.0394″  L 0.0709″)

  • Diameter tolerance: +/- 0.01 mm (0.0004″)
  • Length tolerance*: +/- 0.05 mm (0.002″)
  • Cutting Straightness**: +/- 0.05 mm (0.002″)
  • Material Grade ASTM F560 / ISO 13782 / R05200 (medical)
  • End-style: Burr-Free (Hard Edge)
  • ASTM F86 Cleaned and Passivated

Product ID: P1000-0180-CU2-080

Product Synonyms: Pin Marker, Tantalum Wire Pin

*) max variation in arithmetic length (average length of pin)
**) max variation from arithmetic length (due to non-parallel or curved cutting surfaces)

Sample – 20 Pcs


Samples are shipped worldwide by FedEx Express in max 3 days for a flat rate of €129.00. Pay by credit card via PayPal in your currency.

Product Specifications

(Press topic to read more)

Tolerance: D=0.01 mm / L=0.05 mm

X-medics standard pin diameter tolerances is 0.01 mm, with a pin length tolerance of 0.05 mm and meet common general tolerance requirements when inserted into PEEK and other medical grade materials.

Tantalum ASTM F560 / ISO 13782 Grade R05200

Surgical grade tantalum pins are available in two tantalum material grades – R05200 (electron beam / vacuum arc melted) and R05400 (sintered). Ta R05200 and Ta R05400 are equally suitable for surgery and offer almost similar mechanical and chemical characteristics.

> Read more about tantalum grades.

End-style: Burr-Free Endstyle

X-medics’ tantalum pins are delivered with burr-free hard edge end-styles. This design is optimized to meet a favorable performance / price ratio.

ASTM F86 Cleaned and Passivated

ASTM F86 Cleaning and Passivation is a standard cleaning procedure to remove particles and process residues from the surface of the tantalum spheres. As ASTM F86 is a cost efficient cleaning method it is specified by 90 percent of X-medics’ customers.

> Read more about ASTM F86 cleaning and passivation

Alternative Product Options

(Press topic to read more)

Other tolerance Options

Please contact us for a customer specific quote.

Grade R05400 Option

Please contact us for a customer specific quote.

Alternative end-style

Please contact us for a customer specific quote.

Option Without passivation

Please request a custom specific quote

Additional Features

(Press topic to read more)

3rd Party Material test Report Included

Every material lot used in X-medics’ production of tantalum pins has been tested by an independent ISO 17025 accredited laboratory to confirm that the tantalum material satisfies the requirements of ASTM F560 / ISO 13782 and is suitable for pin processing. A copy of the independent certificate is provided with all shipments from X-medics. The laboratory analyses the chemical and mechanical characteristics of the wire and compare them again the ISO/ASTM tantalum grade standards.

> Read more about 3rd party material testing.

ISO 9001 and ISO 13485 Certified

X-medics is ISO 9001:2015 and ISO 13485:2012 certified by Bureau Veritas Europe.

> Link to ISO 9001:2015 certificate
> Link to ISO 13485:2012 certificate

Independent Audited for Conflict Free Sourcing

All X-medics’ tantalum products are conflict-free. X-medics only works with suppliers that can show evidence for a continuously 3rd party auditing performed by independent auditors appointed by Electronic Industry Citizenship Coalition or similar recognized bodies. Proper origin of the materials and compliance Dodd-Frank Wall Street Reform and Consumer Protection Act conflict minerals is required documented and this documentation can be tracked on the certificate that follows any shipment from X-medics. X-medics does not use tantalum minerals with origin in the DRC Congo or other conflict areas covered by the law.

> Read more about conflict free sourcing of tantalum.

REACH and RoHS compliant

All tantalum balls from x-medics are REACH and RoSH compliant.

> Read more about REACH and RoHS compliance

Available Packaging

(Press topic to read more)

Sample - 20 Pcs

Our Sample of 20 pcs tantalum pins is delivered in an anti-static bag

Bag -100 pcss

Delivered in anti-static bags

Custom Packaging Size

Tantalum pins may be delivered in custom packaging

Disclaimer: The content of this site is copyrighted by X-medics S.m.b.a.  By using this Site, you consent to the collection and use of your information by X-medics as set forth in our policy.  X-medics cannot be held responsibly for any use of products in a specific application.  Haftungsausschluss: Der Inhalt dieser Website ist urheberrechtlich geschützt durch X-medics S.m.b.a.  Durch die Nutzung dieser Website erklären Sie sich mit der Erhebung und Verwendung Ihrer Daten durch X-medics wie in unseren Richtlinien dargelegt einverstanden.  X-medics kann nicht für die Verwendung von Produkten in einer bestimmten Anwendung verantwortlich gemacht werden.  Descargo de responsabilidad:  El contenido de este sitio es propiedad de X-medics S.m.b.a.  Al usar este Sitio, usted acepta la recopilación y el uso de su información por parte de X-médicos como se establece en nuestra política.  X-medics no se puede responsabilizar por el uso de productos en una aplicación específica.