Tantalum Pin

D 1.00 mm  L 7.70 mm (D 0.0394″  L 0.303″)

  • Diameter tolerance: +/- 0.01 mm (0.0004″)
  • Length tolerance*: +/- 0.05 mm (0.002″)
  • Cutting Straightness**: +/- 0.05 mm (0.002″)
  • Material Grade ASTM F560 / ISO 13782 / R05200 (medical)
  • End-style: Burr-Free (Hard Edge)
  • ASTM F86 Cleaned and Passivated

Product ID: P1000-0770-CU2-080

Product Synonyms: Pin Marker, Tantalum Wire Pin

*) max variation in arithmetic length (average length of pin)
**) max variation from arithmetic length (due to non-parallel or curved cutting surfaces)

100 Pcs


Samples are shipped worldwide by FedEx Express in max 3 days for a flat rate of €169.00. Pay by credit card via PayPal in your currency.

Product Specifications

(Press topic to read more)

X-medics standard pin diameter tolerances is 0.01 mm, with a pin length tolerance of 0.05 mm and meet common general tolerance requirements when inserted into PEEK and other medical grade materials.

Surgical grade tantalum pins are available in two tantalum material grades – R05200 (electron beam / vacuum arc melted) and R05400 (sintered). Ta R05200 and Ta R05400 are equally suitable for surgery and offer almost similar mechanical and chemical characteristics.

> Read more about tantalum grades.

X-medics’ tantalum pins are delivered with burr-free hard edge end-styles. This design is optimized to meet a favorable performance / price ratio.

ASTM F86 Cleaning and Passivation is a standard cleaning procedure to remove particles and process residues from the surface of the tantalum spheres. As ASTM F86 is a cost efficient cleaning method it is specified by 90 percent of X-medics’ customers.

> Read more about ASTM F86 cleaning and passivation

Alternative Product Options

(Press topic to read more)

Please contact us for a customer specific quote.

Please contact us for a customer specific quote.

Please contact us for a customer specific quote.

Please request a custom specific quote

Additional Features

(Press topic to read more)

Every material lot used in X-medics’ production of tantalum pins has been tested by an independent ISO 17025 accredited laboratory to confirm that the tantalum material satisfies the requirements of ASTM F560 / ISO 13782 and is suitable for pin processing. A copy of the independent certificate is provided with all shipments from X-medics. The laboratory analyses the chemical and mechanical characteristics of the wire and compare them again the ISO/ASTM tantalum grade standards.

> Read more about 3rd party material testing.

X-medics is ISO 9001:2015 and ISO 13485:2012 certified by Bureau Veritas Europe.

> Link to ISO 9001:2015 certificate
> Link to ISO 13485:2012 certificate

All X-medics’ tantalum products are conflict-free. X-medics only works with suppliers that can show evidence for a continuously 3rd party auditing performed by independent auditors appointed by Electronic Industry Citizenship Coalition or similar recognized bodies. Proper origin of the materials and compliance Dodd-Frank Wall Street Reform and Consumer Protection Act conflict minerals is required documented and this documentation can be tracked on the certificate that follows any shipment from X-medics. X-medics does not use tantalum minerals with origin in the DRC Congo or other conflict areas covered by the law.

> Read more about conflict free sourcing of tantalum.

All tantalum balls from x-medics are REACH and RoSH compliant.

> Read more about REACH and RoHS compliance

Available Packaging

(Press topic to read more)

Delivered in anti-static bags

Tantalum pins may be delivered in custom packaging

Disclaimer: The content of this site is copyrighted by X-medics S.m.b.a.  By using this Site, you consent to the collection and use of your information by X-medics as set forth in our policy.  X-medics cannot be held responsibly for any use of products in a specific application.  Haftungsausschluss: Der Inhalt dieser Website ist urheberrechtlich geschützt durch X-medics S.m.b.a.  Durch die Nutzung dieser Website erklären Sie sich mit der Erhebung und Verwendung Ihrer Daten durch X-medics wie in unseren Richtlinien dargelegt einverstanden.  X-medics kann nicht für die Verwendung von Produkten in einer bestimmten Anwendung verantwortlich gemacht werden.  Descargo de responsabilidad:  El contenido de este sitio es propiedad de X-medics S.m.b.a.  Al usar este Sitio, usted acepta la recopilación y el uso de su información por parte de X-médicos como se establece en nuestra política.  X-medics no se puede responsabilizar por el uso de productos en una aplicación específica.